Spoon carving knives – BeaverCraft Wood Carving & Green Woodworking Tools Manufacturer from Ukraine

Spoon carving knives – BeaverCraft Wood Carving & Green Woodworking Tools Manufacturer from Ukraine

Medium has an 8 inch handle with 2 1/2 inch to 3 1/4 inch edges with 3/16″ tangs. A small size has a 6 1/2 inch handle and a 1 3/4 inch to 2 1/8 inch edge. A custom wood carving set perfect for carving bowls and roughing out masks. Handmade with a moose antler handle.

I also learned that a hook knife is sometimes called a “crook knife”. But Deepwoods Spoon Carving Kit if it loops all the way back to the handle, it’s called a “scorp”.

Tramontina 80020/502 Plastic Handle Carving Knife, 8″

If something feels off, step back and rethink your approach. Be safe, even if it takes a little longer. The Number 162 hook Knife has a 2.0mm (5/64″) thick blade curved to an internal radius of 15mm (9/16″). It has cutting edges on both sides of the blade so it can be used left- or right-handed. Blade width is about 13mm (9/16″).It is well-suited for spoons.

The Straight Blade Knife is used primarily for shaping the back of the spoon, the neck, and the handle. Highly recommended for any carver age 10 (with adult supervision) and above. The Mountain Elk Products Wood Carving Hook Knife is another good choice if you’re looking for a hook knife for spoon carving.

Extra work for sure but it is the superior steel for crooked knives, hook knives, bent knives and crook knives. We mill recovered wood ourselves from local orchards, trade with local artisans and salvage. We’ve been doing it this way for over 20 years. We recover and recycle carbon steel.

On the other hand if you are one to use the push cut technique more often than not, you’ll want to stick with the 164. A single edge blade allows for the blunt side of it to be used as a stabilizer, but this carving style would have to be performed in your left hand. It is a single edge steel blade, which some of you might shrug at and keep reading or you might rule this option out completely. A single edge blade can be tough or a dream to work with because it limits left handed people to only push cuts or strictly pull cuts for right handed people.

My carving knives are intended for serious wood carvers. They are razor sharp and can be very dangerous if used improperly.

SK5 – Spoon Carving Knife Deep Cut Bevels Oak Handle

• I soon warmed up to it, but still used it only when I had to.I’m left handed and normally hold my carving knives in my left hand.
• A small size has a 6 1/2 inch handle and a 1 3/4 inch to 2 1/8 inch edge.
• Two long handled wood carving knives, 4” hand forged double beveled crooked knife blades set into 10” hand carved butternut wood handles.
• It also comes with a full-tang knife, which means the blade runs all the way through the handle.
• My thanks to Larry Williams, Clark and Williams Planemakers.
• There’s more than one way to get the job done safely.

On occasion, however, I do bust out the curved chisels and gouges. But that usually only at Halloween (and only to carve the pumpkin). This double edge https://bestwoodcarvingtool.com/5-best-spoon-carving-tools/ tool is the best spoon carving knife for smooth concave cuts. A high carbon steel blade with an internal radius of 0.6 inches is hard to argue against.

I use both sizes of the slots knives and a different style Mora hook on most of my carving projects. I am sure you know that green wood is easier for carving and I mainly use oil wax finishes. I have found the longer blade to be much more versatile. I believe it was inspired by a Peter Follansbee birch or ash bark blade cover, as I recall. Good job and get into bowl carving next.

They are made from an excellent high alloy steel, very hard and tough so they hold an edge for a long time. They come razor sharp and ready to use.

Even though this is number 3 on our list of best spoon carving knives it definitely deserves the number 2 spot. Unlike the 164, the Mora 162 offers a high carbon steel blade with a double edge. I’ll get to the blade last, but FIRST the handle is made of hardwood oak that is processed with https://bestwoodcarvingtool.com/ organic linseed oil. Something I noticed about the handle is that both ends have rounded tapered edges which is a pretty generic way of shaping handheld tools. Reason being is because it makes carving for long periods of time less strenuous on the hands and real easy to get a good grip.

TUO Cutlery Slicing Carving Knife – HC German Stainless steel – Meat Knife with Ergonomic Pakkawood Handle – 12″ – Fiery Series

Upon returning home I realized that the wonderful types of tools they use are not available here in North America. So, as a tool maker I decided to fill the need for these types of tools.

Manufacturer guarantees/warranties for power tools, CNC and laser products will supersede the Rockler Guarantee if these items are damaged or defective. For these items, please call the store where you purchased them or our customer service department at so we can assist you. I hope my adventure has inspired you to give spoon carving a try. Or maybe all we did was learn a thing or two together. Either way, it was a fun and rewarding experience.

Blade dimensions are important, that’s a fact. Always, always go with basswood if you’re a beginner carver, hands down. The best wood for carving is basswood because the grain is hardly an issue with it. You always here to carve with the grain right, otherwise your piece will chip off into bits, and you typically see that a lot with hardwood. Anyway, sorry about the rant, the 164 seems to be a popular favorite and is often times used in woodcarving workshops.

It’s a bit on the heavy and large side, but that’s because it’s a premium product. Overall, some people might carve spoons enough to get a good return with this knife, but most people won’t need to spend this much. It also comes with an ergonomic handle that’s flat across the top, helping it fit perfectly into most hands. Additionally, it has a great reputation for holding its edge.